Product ID:BELGARD EVN SCALE/DEPOSIT CONTROL
MSDS Date:12/07/1993
FSC:6850
NIIN:00N051079
MSDS Number: BVKNY

FMC CORP

1735 MARKET ST
PHILADELPHIA, PA 19103
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 215-299-6000

Cage: 0TYC8

FMC CORP

PHILADELPHIA, PA 19103 US

Telephone: 800-468-3853

Cage: 0TYC8

SODIUM SALT OF POLYMALEIC ACID; (POLYMALEIC ACID, SODIUM

CAS: 30915-61-8

OSHA PEL N/K

ACGIH TLV: N/K

WATER

CAS: 7732-18-5

RTECS: ZC0110000

OSHA PEL N/K

ACGIH TLV: N/K

IMPURITY.

CAS: 371-47-1

RTECS: ON2000000

Fraction By Weight: SEE ING

OSHA PEL N/K

ACGIH TLV: N/K

(3-METHYLPHENYL)METHYL, BUTANEDIOIC ACID, SODIUM SALT.

Fraction By Weight: SEE ING

OSHA PEL N/K

ACGIH TLV: N/K

SPILLS WHERE RUBBER OVERSHOES OR BOOTS

RTECS: 9999999ZZ

LD50 LC50 Mixture:LD50:(ORAL,RAT)15 G/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: PRODUCT MAY BE IRRITATING TO
EYES AND SKIN. MIST MAY CAUSE IRRITATION OF EYES, NOSE, THROAT AND
LUNGS. CHRONIC:A 90-DAY FEEDING STUDY IN ANIMALS INDICATED KIDNEY
DAMAGE. PRODUCT WAS NOT GENOTOX IC IN STANDARD TESTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: IMMED FLUSH W/WATER FOR AT LEAST 15 MIN. GET MED ATTN.
SKIN: PROMPTLY WASH W/MILD SOAP AND WATER. INHAL: REMOVE TO FRESH
AIR. INGEST: IF CONSCIOUS, GIVE LARGE QTY OF WATER. GET MED ATTN.
DECONTA M PROC: PROMPTLY REMOVE WET CONTAMD NON-IMPREVIOUS CLTHG.
WASH BEFORE REUSE.

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE TOXIC (SOLIDS).

Spill Release Procedures:ISOLATE AREA. WEAR PRESCRIBED PROT CLTHG &
EQUIP. DIKE TO CONFINE SPILL. ABSORB W/ABSORB SUCH AS CLAY,
SAND/KITTY LITTER. SHOVEL WASTE INTO APPRVD CNTNR & DISP OF. TO
DECONTAM SPILL AREA, TOOLS & EQUI P, WASH W/WATER & ADD TO DRUMS OF
WASTE(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED WHEN NOT
IN USE. PROTECT AGAINST PHYSICAL DAMAGE.
Other Precautions:IMPORTANT:THIS MATL IS NOT INTENDED FOR USE IN PRODS
FOR WHICH PRLNG CONT W/MUC MEMBS/ABRADED SKIN/IMPLANTATION W/IN
HUMAN BODY IS SPECIFICALLY INTENDED, UNLESS FINISHED PROD HAS BEEN
TESTED I/A/W FOO D & DRUG ADMIN &/OR OTHER APPLIC(SUPDAT)

Respiratory Protection:USE NIOSH/MSHA APPRVD DUST/MIST RESP PROT WHEN
AIRBORNE MIST IS EXPECTED.
Ventilation:USE W/GENERAL ROOM VENT/LOC EXHST WHEN AIRBORNE CONTAM IS
EXPECTED.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPVD CHEM WORK GOGG .
Other Protective Equipment:IMPERVIOUS APRON & GAUNTLETS WHEN SPLASHING
IS EXPECTED DURING LIQ TRANSFER. NORM WORKSHOES EXCEPT IN CNDTNS OF
(ING 5)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAV:1.26-1.3(H*2O=1). SPILL PROC:ALREADY COLLECTED. WASTE DISP
METH:REGULATORY AGENCIES SHOULD BE CONTACTED PRIOR TO DISP. OTHER
PREC:SFTY TESTING REQUIREMENTS. BECAUSE OF WIDE RANGE OF SUCH POT
NTL USES, FMC CORP IS NOT ABLE TO REC THIS MATL AS SAFE & EFTIVE
FOR SUCH USES & ASSUMES NO LIABILITY FOR ANY SUCH USES.

Boiling Pt:B.P. Text:>212F,>100C
Melt/Freeze Pt:M.P/F.P Text:<32F,<0C
Vapor Pres:24 @ 25C
Vapor Density:0.02 @ 25C
Spec Gravity:SUPP DATA
pH:8-9
Evaporation Rate & Reference:EQUAL WATER
Solubility in Water:MISCIBLE @ 25C
Appearance and Odor:CLEAR/SLIGHTLY HAZY AMBER LIQUID, SLIGHT ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:OXIDIZING AGENTS.
Hazardous Decomposition Products:THERMAL DECOMPOSITION AND BURNING MAY
PRODUCE CARBON MONOXIDE AND CARBON DIOXIDE.

Waste Disposal Methods:OPEN DUMPING/BURNING OF MATL IS PROHIBITED.
ACCEPT METH OF DISP IS TO BURN IN INCIN I/A/W ALL LOC, STATE & FED
ENVIRON LAWS, RULES, STDS & REGS. BECAUSE ACCEPT METH OF DISP MAY
VARY BY LOCATION & REGU LATORY REQUIREMENTS MAY CHANGE. APPROP
(SUPDAT)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.